Telnet Messages - GridConnect Device Server MSS 485 User Manual

Device Installer

3.12.2 Telnet Messages

3. The window displays:
MAC address 00204A82CCAA
Software version V6.1.0.2 (060217) XPTEXE
Press Enter for Setup Mode
4. To enter the Setup Mode, you must press Enter within 5 seconds. The configuration settings will
appear.
5. Select an option on the menu by entering the number of the option in the Your choice ? field and
pressing Enter.
6. To enter a value for a parameter, type the value and press Enter, or to confirm a current value, just press
Enter.
7. When you are finished, save the new configurations (option 9). The unit will reboot.
*** basic parameters
Hardware: Ethernet TPI
IP addr 0.0.0.0/DHCP/BOOTP/AutoIP, no gateway set
DHCP device name : not set
*** Security
SNMP is
SNMP Community Name: public
Telnet Setup is
TFPT Download is
Port 77Feh is
Web Server is
Web Setup is
ECHO is
Encryption is
Enhanced Password is disabled
Port 77F0h is
*** Channel 1
Baudrate 9600, I/F Mode 4C, Flow 00
Port 10001
Connect Mode : C0
Send '+++' in Modem Mode enabled
Auto increment source port
Remote IP Adr: --- none ---, Port 00000
Disconn Mode : 00
Flush Mode : 00
*** Expert
TCP Keepalive
ARP cache timeout : 600s
CPU performance : Regular
Monitor Mode @ bootup : enabled
RS485 tx enable
HTTP Port Number : 80
SMTP Port Number : 25
MTU Size: 1400
Alternate MAC: disabled
Ethernet connection type:
3-22
enabled
enabled
enabled
enabled
enabled
enabled
disabled
disabled
enabled
disabled
: 45s
: active low
auto-negotiate
NET485 User Guide