Washing Dishes; Starting The Programme; End Of Programme; Switching Off The Appliance - Bosch Dishwasher Instructions For Use Manual

en
Programme specifications
The programme specifications can be
found in the summary of instructions.
Programme specifications refer to normal
conditions. Greater deviations may occur
due to:
varying amounts of dishes
water supply temperature
water pipe pressure
ambient temperature
mains voltage tolerances
and the tolerances specific
to the appliance (e.g. temperature,
amount of water, etc.)
The water consumption values refer
to a set water hardness value of 2.
62

Washing dishes

Switching on the appliance and
selecting the programme
Turn on the tap fully.
Rotate the programme selector
the desired programme. The appliance
is now switched on and the Standby
indicator lights up. You can now
4
start the programme.

Starting the programme

Press the START/STOP button
The Standby indicator
the Programme progress indicator
lights up. The programme is
5
executed.

End of programme

The programme ends when
the Programme progress indicator
has gone out and
5
the End-of-programme indicator
illuminates. When the programme
6
ends, the "Top basket washing" function
is de-activated if required (only some
models).
Several minutes after the programme has
ended:
Open the appliance door.
Wait until the dishes have cooled down
and then remove.
When the programme has ended, you can
either switch off the appliance or restart it
with the same or another programme.

Switching off the appliance

Several minutes after the programme
has ended, rotate the programme
selector to the OFF position.
1
Close the tap (not applicable
if Aquastop fitted).
to
1
.
8
goes out and
4