Bosch Dishwasher Instructions For Use Manual page 71

en
Transporting the dishwasher
Drain water from the dishwasher. Secure
all loose parts. The appliance should only
be transported in an upright position.
If the appliance is not kept upright
during transport, any water left inside
may seep into the control module and
cause subsequent errors with
programme functions.
The appliance must be drained
according to the following steps:
Turn on the tap.
Select any programme, start and leave
to run for approx. 4 minutes.
Terminate the programme by pressing
the START/STOP button
3 seconds. The programme end
indicator flashes.
6
Wait approx. 1 minute until
the programme end indicator
goes out and the standby indicator
illuminates.
4
Rotate the programme selector
to the OFF position.
Turn off the tap.
Protection from freezing
temperatures
If the appliance is installed in a location
where there is a risk of freezing
temperatures (e.g. in a holiday home), all
water must be completely drained out of
the interior (see "Transporting the
dishwasher").
Turn OFF the tap, disconnect the supply
hose and allow to drain.
72
for
8
6