Terminating The Programme - Bosch Dishwasher Instructions For Use Manual

Interrupting the programme
Press the START/STOP button
The Programme progress indicator
flashes, i.e. the programme has
5
been interrupted.
You can now open the appliance door
to add more dishes, for example.
As soon as the door is closed,
the programme continues automatically.
If there is a hot-water connection or if
the appliance has already heated up,
leave the door open slightly for several
minutes before closing it. Otherwise,
the door may jump open due
to expansion.
If you did not open the door, press
the START/STOP button
continue the programme.
When the door is closed, the programme
can be interrupted for a maximum 9 hours.
Then the programme continues
automatically.

Terminating the programme

Press the START/STOP button
approx. 3 seconds.
The programme progress indicator
goes out. The programme is
5
terminated. If required, the "Top basket
washing" or "Timer programming"
function (only some models) is also
de-activated.
The End-of-programme indicator
flashes for approx. 1 minute and
6
the water is drained at the same time.
In order not to terminate the pumping
process, you should leave all settings
unchanged and the door closed while
the indicator is flashing.
When the pumping process has ended,
the End-of-programme indicator
goes out and the Standby indicator
6
lights up. You can now restart or
4
switch off the appliance.
Changing the programme
. You can change the programme at any
8
time (except in the drying section of
the programme) simply by rotating
the programme selector
Sections of the previous programme (e.g.
cleaning) which have already begun end
before the new programme continues with
the next sections.
If the timer programming has been
activated (only some models), the time
continues counting down unchanged.
to
8
for
8
en
.
1
63