Table of Contents
Advertisement
Instructions for use
If you are using a pot that is not suitable, not correctly positioned or not of the correct dimensions
for your induction hob, the message "no pot" will appear in the display (see figure on the left). If no pot is
detected within 60 seconds, the hob switches off.
To change the power level, move your finger horizontally on the slide touchscreen: the number inside
the circle will change with just a quick slide of the finger from a minimum of 1 to a maximum of 9. You can
activate the booster function by pressing "BOOST" on the slide touchscreen ("P" on the display). If more
than one cooking zone is on, the slide touchscreen allows you to change the power level of the selected
zone, indicated by the presence of a luminous dot at the bottom right of the power level indicator. To
select a zone, simply press the relative round key.
Switching off cooking zones
Select the cooking zone to be switched off by pressing the relative round key (a dot lights up at the
bottom right of the power level indicator). Press OFF on the slide touchscreen.
The cooking zone switches off and, if the zone is still hot, the letter "H" appears in the circle.
"H" is the residual heat indicator. The hob is fitted with a residual heat indicator for each cooking zone;
these indicators alert the user when cooking zones are still hot. When the cooking zone cools down, the
display switches off.
Timer selection
The timer can be used to set a max. cooking time of 99 minutes.
Select the cooking zone to be used with the timer (a dot lights up at the bottom right of the power level
indicator), then set the required cooking time using the + and - keys of the timer function: the time in
minutes is shown next to the cooking zone display.
A few seconds after the key is pressed, the timer begins the countdown (the luminous dot of the selected
cooking zone starts flashing).
Once the set time has elapsed, an acoustic signal sounds and the cooking zone switches off automatically.
For the timer associated with the SENSOR function, refer to the description of the function on the
following pages.
Control panel lock
This function locks the hob controls to prevent accidental switching on (e.g. during cleaning).
Press the
key for three seconds : an acoustic signal sounds and an indicator light turns on above the
lock symbol to confirm activation. The control panel is locked with the exception of the OFF function. To
unlock the controls, repeat the child safety activation procedure. The illuminated dot switches off and the
hob is active again.
IMPORTANT: The presence of water, liquid spilled from pots or objects of any nature resting on the key
below the symbol can accidentally activate or deactivate the Control panel lock function.
11
Advertisement
Table of Contents
