Subscribe to Our Youtube Channel
Related Manuals for Team Losi TEN-SCTE
Summary of Contents for Team Losi TEN-SCTE
- Page 1 Not responsible for errors. All prices subject to change without notice.
-
Page 2: Getting Ready
Product Online The following terms are used throughout the product Register your TEN-SCTE now and be the fi rst to fi nd out about literature to indicate various levels of potential harm when the latest options parts, product updates and more. Log on to operating this product: www.LOSI.com and follow the product registration link to stay... -
Page 3: Quick Start
Never leave batteries unattended while charging. time. If the battery is not fully discharged, you can potentially • Never charge a battery while it is installed in the TEN-SCTE. over-charge your battery pack. Do not charge any battery • Do not charge any battery that appears to have any unattended, and monitor for heat build up. - Page 4 The Losi TEN-SCTE Overview The Losi TEN-SCTE Overview Rear Shock Sway Bar Rear Camber Link Rear Suspension Arm ESC with Fan (not included) Motor (not included) Center Diff erential Battery Tray Receiver Location Steering Servo (not included) Tie Rod Front Suspension Arm...
-
Page 5: Required Equipment
Slide motor with adapter into motor mount, set mesh, and tighten using 5-40 x 3/8 button head screw. Be sure to use threadlock. In addition to the tools included with the TEN-SCTE, you will fi nd the following both useful and in some cases necessary. •... - Page 6 Driving the TEN-SCTE Driving the TEN-SCTE Always follow these precautions when running your TEN- SCTE. Do not run the TEN-SCTE at dusk or in the dark when Servo Servo visibility is limited. Servo Manufacturer, Make/Model Spacer...
- Page 7 Look over all the wiring and connections for bare wire or any place which could lead to a short circuit. After you become familiar with driving your TEN-SCTE, you may need to reset or make adjustments for better driving performance.
-
Page 8: Maintenance
In addition to the service needs pointed out in this guide, on the front shock tower. The position can be easily adjusted you should try to maintain your new TEN-SCTE for proper by simply moving the top of the shock to another hole. The performance and to prevent wear. - Page 9 TEN-SCTE feel stiff er. This will amount of negative camber (.5-1 degree) is best. Increasing help keep the TEN-SCTE fl atter with less roll, but can make the negative rear camber (in the range of 1.5-3 degrees) will TEN-SCTE handle worse in bumpy conditions.
- Page 10 Regardless of what the reason you will want to If your TEN-SCTE needs a softer or fi rmer spring, change the follow these simple steps to service, refi ll, and bleed your TEN- spring.
-
Page 11: Warranty And Repair Policy
Warranty and Repair Policy Warranty and Repair Policy Warranty Period Exclusive Warranty- Horizon Hobby, Inc., (Horizon) warranties that the Products purchased (the “Product”) will be free from defects in materials and workmanship at the date of purchase by the Purchaser. Limited Warranty Horizon reserves the right to change or modify this warranty without notice and disclaims all other warranties, express or... -
Page 12: Warranty Services
United States Warranty Services Warranty Services (Electronics and engines) Questions, Assistance, and Repairs Horizon Service Center Your local hobby store and/or place of purchase cannot provide 4105 Fieldstone Rd warranty support or repair. Once assembly, setup or use of the Champaign, Illinois Product has been started, you must contact Horizon directly. - Page 13 10-32 x 3/8 Setscrews LOSB3104 Front and Rear Gearbox Set: 10-T LOSA6298 8-32 x 1/8 Setscrews LOSB3436 40T Spur Gear, Mod 1: TEN-SCTE LOSA6299 5-40 x 1/8 Setscrews LOSB3495 Wheel Hex (4) with Pins: TEN-SCTE LOSA6302 5-40 Steel Lock Nuts...
-
Page 14: Optional Parts List
One-Piece Shock Standoffs: TEN LOSA99165 Aluminum Turnbuckle Wrench LOSB2908 Shock Collars, Aluminum (2): TEN LOSA99772 Camber Gauge LOSB2909 Piston Pack (2), Ten-T, TEN-SCTE LOSA99173 Ride Height Gauge LOSB2960 Front and Rear Spring Set (4)–Soft (Silver): 10-T LOSA99174 Car Stand LOSB2962 Front and Rear Spring Set (4)–Firm (Gold): 10-T... - Page 15 Ten-SCTE 10/06/10 1 degrees OUT 29.5mm 0 degree Stock/20 degrees 2.0mm 4 holes @ 1.07mm/40 wt Inside Gold/Hard Center Outside 85mm Center to Center Long Position 1 Position 1 / Outside Grease For increased stability, use 10000 weight oil in the front and center differentials.
- Page 19 B2904 B2904 B2359 B2906 B2906 A6229 B2845 B2845 B2960 B2960 Soft Soft B2359 B2961 B2961 B2826 Medium A4006 Medium B4210 B2825 B2962 B2962 Firm B2906 Firm A6204 B2906 B2904 A6350 B2904 B2360 B2905 B2905 B2359 B2904 B2904 B2904 B2904 B2359 A6271 B2416 B2412...
- Page 20 A7215 A6258 B7018 B7109 A6315 A6240 B2421 A6264...
- Page 21 ©2010 Horizon Hobby, Inc. Not responsible for typographical errors. The Spektrum trademark is used with permission of Bachmann Industries, Inc. Losi, Xcelorin and MultiPro are trademarks or registered trademarks of Horizon Hobby, Inc. Airtronics® is a registered mark of Sanwa Electronic Instrument Co., Ltd., Osaka, Japan. Printed 11/2010 Futaba is a registered trademark of Futaba Denshi Kogyo Kabushiki Kaisha Corporation of Japan 30160.I...
Need help?
Do you have a question about the TEN-SCTE and is the answer not in the manual?
Questions and answers