CAS SW-1S Owner's Manual
Sw series
Hide thumbs
Also See for SW-1S:
- Service manual (43 pages) ,
- Owner's manual (34 pages) ,
- Manual (23 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for CAS SW-1S
Summary of Contents for CAS SW-1S
-
Page 2: Table Of Contents
CONTENTS PRECAUTIONS ..........4 PREFACE ............... 6 NAMES AND FUNCTIONS ......6 ASSEMBLY METHOD (SW-1W ONLY) ..7 OPERATIONS ............8 1. Simple Weighing Mode ........8 2. Weighing with Tare..........8 3. Changing Unit of Weight ........9 4. Auto-Power Off Function ....... 10 BATTERY MAINTENACE ......11 ERROR MESSAGE... -
Page 3: Precautions
PRECAUTIONS... - Page 4 PRECAUTIONS...
-
Page 5: Preface
CAS products. We believe that your needs will be satisfied and you will have proper reliability. This manual will help you with proper operation and care of the SW-1S/1N/1W series. Please keep it handy for future reference. NAMES AND FUNCTIONS OVERALL VIEW DISPLAY &... -
Page 6: Assembly Method (Sw-1W Only)
■ KEY FUNCTIONS KEYS FUNCTIONS Used to set the zero point. Used to input or cancel the weight of tare. Used to convert the unit of weight. Used to turn on and off the scale. ASSEMBLY METHOD (SW-1W ONLY) -
Page 7: Operations
OPERATIONS ■Turn on the display by pressing key. Then, the display will show all the segments and count up "0" to "9". You may stop this automatic counting by pressing the key. ■ When you turn on the display, make sure that platter is empty. Otherwise, display will show "Err 1", an error of initial zero range. -
Page 8: Changing Unit Of Weight
3. Changing Unit of Weight ( lb, oz, kg , g) ■ Press the UNIT key in the simple weighing mode. You may select g, kg, lb, oz as the unit of weight.(SW-1S Unit conversion only) ■ Press the UNIT key in the simple weighing mode. -
Page 9: Auto-Power Off Function
4. Auto-Power Off Function Auto-Power off function is to automatically power off as time is set. This function is helpful to save battery, which is not in use. The following is the setting procedure of Auto-power off. ① When the scale is turned ②... -
Page 10: Battery Maintenace
Remove unstable "Err 0" The "Err 0" occurs when scale is not stable. facts. The "Err 1" occurs when a current zero point has Please call your CAS "Err 1" shifted from the last span calibration. dealer. Please remove the "Err 3"... -
Page 11: Specifications
1000hours (Alkaline at 20°C /68°F) Operating -10°C ~ +40°C / 14°F ~ 104°F Temperature Minimum Voltage About 5.5V Level of The Battery Option 9V Adapter 300mA, Rear Display, Stainless Tray (SW-1S/1N) Notice: Specifications are subject to change for improvement without notice. - Page 12 MEMO...
- Page 13 MEMO...
- Page 14 MEMO...
Need help?
Do you have a question about the SW-1S and is the answer not in the manual?
Questions and answers