Table of Contents
Advertisement
4
Read the OM-DRAGON™ restore default code:
5.
Read the desired Enable Network code.
6.
END of procedure.
For Host Master Network Layouts (see par. 3.2), The network configuration
parameters can be changed through STAR-Link™ software running on the PC.
Star-Link™ software can be downloaded for free from the Internet at the following
address:
and follow the links :
For OM-DRAGON™ Master Network Layouts (see par. 3.2), The network
configuration parameters can be changed either through the DL Sm@rtSet™
configuration software running on the PC or by reading the barcode selections in the
Network section of this manual starting on page 58. If using configuration barcodes, it
is advised to completely configure the cradles before reconfiguring the DRAGON™
M reader (see below).
After completing the OM-DRAGON™ cradle configuration and
connections in the network, you must reconfigure the DRAGON™
M reader using the STAR-System™ procedure in par. 4.5.
NOTE
30
Restore OM-DRAGON™ default
Enable RS485 Master
Enable RS485 Slave
www.datalogic.com/products
Portable Data Collection Terminals > Software Tools
DRAGON™
Advertisement
Table of Contents
