Displaying Two Signals On One Screen; (Picture&Picture) - Sony Trimaster EL BVM-E250 Operation Manual

Displaying Two Signals
on One Screen
(Picture&Picture)
Two input signals are output on the monitor. You can
select the display mode from Side by Side (side by side),
Wipe (wipe), Butterfly (butterfly) and Blending
(blending). This is useful for adjusting the color or
comparing two pictures.
You can input the file loaded in the Capture menu (page
64) of the Function Setting menu.
Side by Side (side by side)
Signal A Signal B
Wipe (wipe)
Signal A Signal B
90
Displaying Two Signals on One Screen (Picture&Picture)
Two pictures are
displayed side by side.
Left and right pictures
connected at the boundary
position are displayed.
The boundary line of the left
and right area is changed
with the PHASE knob of the
controller.
Butterfly (butterfly)
Signal A Signal B
Blending (blending)
Signal A and Signal B
Notes
• The input signals from INPUT 1 and INPUT 2 of one
standard SDI input or one input adaptor are not displayed
in the multi display.
• You cannot select the same channel number as channels
for signal A and signal B. And set a different channel
number of the different standard input or input adaptor
for signal A and signal B.
• When the wipe or blending mode is used, signal A and
signal B should be genlocked to synchronize with each
other.
• When signal A and signal B are not the same signal
format and signal system, the pictures may not be
displayed correctly.
• The input of signal A is not changed in the multi display.
• The internal signal is not displayed in the multi display.
• The captured picture data is not used to display as signal
A and signal B at the same time.
• The signals are not displayed in the multi display mode
when Pixel Zoom is set to on.
• The color space and gamma setting for signal A is
applied in the multi display.
• The multi display with an HDMI input signal and a
DisplayPort input signal is not possible.
The right picture is a left-right
reversal picture of the left
picture.
The display range of the
picture is changed with the
PHASE knob of the
controller.
A picture that superimposes
signal A and signal B is
displayed.
The mixed ratio of two input
signals is changed with the
PHASE knob of the
controller.