Sony Trimaster EL BVM-E250 Operation Manual page 65

Menu
Delete
Internal Signal
Function Switch
Scan Mode
Native Scan
16:9
H Delay
Function and operation ([
Deletes the file of the captured picture in the "Memory Stick".
When the item is selected, the file names in the "Memory Stick" are displayed.
When the file name is selected, the following message appears.
Delete this file?
OK: To delete the data, press the ENTER (Ent) button.
Cancel: To cancel, press the MENU button.
Selects the internal signal display.
You can select from PLUGE, Gray (20% gray signal), White (100% white signal), 5 step (5
step gray scale signal), Ramp, Color Bars or Black (0% black signal).
To cancel the internal signal, select one from the channel numbers 1 to 30 with the numeric
buttons of the controller.
Note
Internal Signal is not set in the following cases:
• When the XYZ signal, or the HDMI/DisplayPort computer signal is input
• When Side by Side, Wipe, Butterfly or Blending is set to On
Sets the function to be assigned to the function button of the controller in the menu.
Sets the scan mode of the picture.
[Normal Scan]: Normal scan
Under Scan: 3% under scan
Over Scan: Mask of 5% over scan portion in the normal scan
Note
The scan mode is not selectable in the following cases:
• When Native Scan is set to On
• When the input signal has no sync signal
• When the internal signal is displayed
• When Side by Side, Wipe, Butterfly or Blending is set to On
Sets whether or not to display the native scan ([Off] or On).
Note
The native scan is not selectable in the following cases:
• When the input signal has no sync signal
• When Side by Side is set to On
• When Pixel Zoom is set to on
• When the HDMI/DisplayPort computer signal is input (The native scan is displayed
regardless of the setting.)
• When a digital cinema signal (2048 × 1080) is input and the internal signal is displayed
(Native Scan is set to Off and the normal scan is displayed regardless of the setting.)
• When the signal system is the SD signal of 720 × 576 or 1440 × 576, Native Scan Mode is
set to Aspect Correction × 2 and the internal signal is displayed (Native Scan is set to Off
and the normal scan is displayed regardless of the setting.)
Sets whether or not to display the aspect in 16:9 or 1.896:1 (digital cinema signal) (Off or
[On]).
Notes
• The aspect ratio is not selectable in the following cases:
– When Native Scan Mode is set to ×1 or ×2 and Native Scan is set to On
– When the input signal has no sync signal
• The aspect ratio may be fixed to 16:9 due to the signal format.
For details, see "Available Signal Formats" on page 111.
Sets whether or not to display in H delay ([Off] or On).
When the 720/24, 25, 30P signal is input, the display position is changed with the PHASE
knob.
Notes
• The picture is not displayed in H delay in the following cases:
– When the input signal has no sync signal
– When the internal signal is displayed
– When Format of the Channel Configuration menu is set to HDMI or DisplayPort
– When Side by Side, Wipe, Butterfly or Blending is set to On
– When the captured frame is displayed
• The 3D signal analyzing function may not be performed correctly when H Delay is On.
]: factory setting)
65
Function Setting Menu