Functions Supported In Software Version; And 1.2 - Sony Trimaster EL BVM-E250 Operation Manual

Functions Supported in Software Version 1.1 and 1.2
The following new functions are supported for Version 1.1 and Version 1.2 of the BVM-E250.
Software Version 1.1
Menu
1)
• Copy From
(in the Picture Adj menu of the Adjustment menu)
(in the Color Temp Adj menu of the Adjustment
menu)
(in the Channel Configuration menu)
(in the Marker Setting menu of the Function Setting
menu)
(in the File Management menu)
• DisplayPort
(in the Format menu of the Channel Configuration
menu)
(in the RGB Range menu of the Channel
Configuration menu)
• HDMI/DisplayPort Auto
(in the Matrix menu of the Channel Configuration
menu)
(in the RGB Range menu of the Channel
Configuration menu)
• HDMI/DP YCbCr
• HDMI/DP RGB
(in Input Detection of the Gamut Error Display
menu of the Function Setting menu)
• HDMI/DP Status
(in the System Status menu)
• Over Range
(in the On Screen Set menu of the System
Configuration menu)
1)
• Save To
(in the File Management menu)
1)
• Delete
(in the File Management menu)
1) Use the controller with software version 1.6 or higher to use this function.
10
Functions Supported in Software Version 1.1 and 1.2
Supported function
Data in this monitor, in another monitor or in a "Memory
Stick" can be copied.
The settings for the DisplayPort signal are available.
Matrix switching (Matrix) and quantization range setting
(RGB Range) for the HDMI or DisplayPort signal are
available.
The upper and lower limits of the HDMI or DisplayPort
signal level can be set.
The information of the HDMI and DisplayPort signals
can be displayed.
The zebra pattern can be displayed on the portion of
image that exceeds the allowable range of the internal
signal processing circuit.
Stores the system data to a "Memory Stick".
Deletes a file in the "Memory Stick".
Reference page
45, 47, 56, 61, 77
50, 55
52, 55
63, 64
80
74
77
78