Channel Set-Up - Sony Bravia KDL-40BX450 Operating Instructions Manual

Channel Set-up

Analogue Set-up
28
GB
"Analogue Auto Tuning": Tunes in all the available analogue channels.
Usually you do not need to do this operation because the channels are already
tuned when the TV was first installed. However, this option allows you to repeat
the process (e.g., to retune the TV after moving house, or to search for new
channels that have been launched by broadcasters).
"Manual Programme Preset": Changes the available analogue channel
setting.
Press to select the programme you want to modify.
Programme/TV System
Presets programme channels manually.
F f
1
Press / to select "Programme", then press
F f
2
Press / to select the programme number you want to manually tune (if
tuning a VCR, select programme 0), then press
F f
3
Press / to select "TV System", then press
F f
4
Press / to select the best received TV broadcast systems, then press
• Depending on the country/region selected for "Country", this option may not be
available.
Channel
F f
1
Press / to select "Channel", then press
F f
2
Press / to select "S" (for cable channels) or "C" (for terrestrial channels),
g
then press .
3
Tune the channels as follows:
If you do not know the channel number (frequency)
F f
Press / to search for the next available channel. When a channel has been
found, the search will stop. To continue searching, press
If you know the channel number (frequency)
Press the number buttons to enter the channel number of the broadcast you want
or your VCR channel number.
4
Press to jump to "Confirm", then press
Repeat the procedure above to preset other channels manually.
Label
Assigns a name of your choice, up to seven letters or numbers, to the selected
channel.
AFT
Allows you to fine-tune the selected programme number manually if you feel
that a slight tuning adjustment will improve the picture quality.
Audio Filter
Improves the sound for individual channels in the case of distortion in mono
broadcasts. Sometimes a non-standard broadcast signal can cause sound
distortion or intermittent sound muting when watching mono programmes.
If you do not experience any sound distortion, we recommend that you leave
this option set to the factory setting "Off".
Skip
Skips unused analogue channels when you press PROG +/– to select
channels. (You can still select a skipped channel using the number buttons.)
.
.
.
.
F f
/ .
.
.