Channel Set-Up - Sony KLV-32EX330 Service Manual

010COV.book Page 18 Thursday, July 19, 2012 8:44 AM

Channel Set-up

1 Digit Direct When "1 Digit Direct" is set to "On", select a channel using one preset number
button (0 - 9) on the remote.
~ • When "1 Digit Direct" is set to "On", you cannot select channel numbers 10 and above
Auto Tuning Tunes in all the available channels.
Programme Sorting Changes the order in which the channels are stored on the TV.
Programme Labels Assigns a channel name of your choice up to seven letters or numbers.
Manual Programme Before selecting "Label"/"AFT"/"Audio Filter"/"Skip"/"Colour System", press
PROG +/– to select the programme number with the channel. You cannot select
Preset
a programme number that is set to "Skip" (page 18).
"Programme"/"TV System"/"Frequency": Presets programme channels
manually.
1
2
3
4
5
6
Repeat the procedure above to preset other channels manually.
"Label": Assigns a name of your choice, up to seven letters or numbers, to the
selected channel.
"AFT": Fine-tune the selected channel manually. When "On" is selected, the fine
tuning is performed automatically.
"Audio Filter": Improves the sound of individual channels when distortion occurs
in mono broadcasts in TV system "B/G", "I" and "D/K".
~ • You cannot receive stereo or dual sound when "High" is selected.
"Skip": Skips unused channels when you press PROG +/– to select channels.
(You can still select a skipped channel using the number buttons.)
"Colour System": Selects the colour system ("Auto", "PAL", "SECAM",
"NTSC3.58", "NTSC4.43" or "PAL60") according to the channel.
"Signal Level": Displays the signal level for programme currently being watched.
FM Radio Set-up Preset up to 30 FM radio stations that can be received in your area.
"Auto Tuning": Automatically tune and store all the available channels.
1
2
"FM Radio Presets": Manually tune and store each available channel one at a
time.
~ • To enable this feature, access to FM Radio mode by using Home Menu (page 12),
18
GB
entering next digit using the remote.
Select "Programme", then press
F f
Press / to select the programme number you want to manually tune
(if tuning a VCR, select channel 0), then press RETURN.
F f
Press / to select "TV System", then press
F f
Press / to select your TV broadcast systems, then press
F f
Press / to go to the frequency range indication ("VHF Low", "VHF High" or
"UHF"), then press .
Tune the channels as follows:
G g
Press / to search for the next available channel. When a channel has been
found, the search will stop. To continue searching, press
Select "Auto Tuning", then press
Select "OK" to automatically tune in all the available channels.
then preset your desired FM radio stations according to the steps mentioned above.
.
.
.
G g
/ .
.
KLV-40EX430/43A/43B_32EX330/33A/33B
4-431-702-13(1)