Iv.6 Tech Menu : Technician - Bodet HMT Installation Instructions Manual

IV.6 TECH menu : technician

1. Enter the TECH menu (see page 15).
2. The 24 (or 12) hour clock time display mode blinks. Modify
with the [R] button.
3. Press the [S] button to validate the mode and to go on to
the adjustment of the day/month order.
4. The day/month or month/day order blinks. Modify with the
[R] button.
5. Press the [S] button to validate the order and to go on to
the selection of synchronisation mode.
6. The synchronisation mode flashes (Independent "Ind",
Radio "rAd", GPS "GPS", AFNOR "AFn", Minute "Min", 1/2
minute "1:2M", DHF "dHF" or NTP "ntP" (see page 30
for further explanations on each type of time distribution).
Modify with the [R] button.
7. Press the [S] button to validate the synchronisation mode.
8. If you select ntP, program the end of the multicast address
239.192.xxx.nnn. Select the address between Bodet (49)
and other (54). Modify with the [R] button.
a. Press the [S] button to validate.
b. Select the end of the multicast address (0 to 15). Modify with
the [R] button.
c. Press the [S] button to validate.
28