Iii.6 Installation On A Dhf Network - Bodet HMT Installation Instructions Manual

III.6 Installation on a DHF network

The first time you switch it on, you must set the clock to INIT mode (see page
29) in the technician menu.
INIT mode enables matching with a master clock which is itself in INIT mode.
It switches to normal mode automatically on reception of the time from the
master clock, memorising the address of the transmitter.
In the event of interference or absence of reception, it continues to function with
its time base.
If need be (transmitter channel change, new installation, etc.), it is possible to
reset the clock to "Initialisation" mode in the technician menu.
The receiver is supplied installed inside the clock. Check that the receiver is
correctly connected on the terminal strip of the electronics board.
DHF antenna
13