Iii.4 Installation On An Afnor Network - Bodet HMT Installation Instructions Manual

III.4 Installation on an AFNOR network

Connect the cable as shown in the diagram below (non-polarised inputs).
The clock sets itself to the right time after receiving several coherent time
messages. Between successive synchronisations, the time base changes
normally in accordance with the internal base.
If the clock is in COD mode (see page 29), the time displayed is the time
received. If the clock is in LOC mode (see page 29), the time displayed takes
into account the time differences chosen in the time menu (time difference and
summer/winter.
AFNOR input
11