Iv.2 Chro Menu: Count-Up And Count-Down Setting - Bodet HMT Installation Instructions Manual

IV.2 CHRO menu: count-up and count-down setting

1. Enter the CHRO menu (see page 15).
2. A message flashes ("up", "down", "day up" or "day down").
Modify with the [R] button.
"Up" starts timing in count-up mode,
"down" starts timing in count-down mode and "day" starts a
countdown in days.
day down starts timing in count-down mode in days,
day up starts timing in count-up mode in days, (the
counting will stop on the last day at midnight).
3. Press the [S] button to validate the selection.
4. If you select Up or Down: choose between HM (count-up
or count-down in Hours and Minutes: 99 h 59 m maximum)
or MS (count-up or count-down in Minutes and Seconds:
59 m 59 s maximum) with the [R] button. Press the [S]
button to validate the selection.
a. If HM: enter the hours with the [R] button. Press the [S]
button to validate. Then enter the minutes with the [R] button.
Press the [S] button to validate.
b. If MS: enter the minutes with the [R] button. Press the [S]
button to validate. Then enter the seconds with the [R] button.
Press the [S] button to validate.
Note: the value entered corresponds to the maximum value to
be reached in count-up mode and to the initial value in
count-down mode.
5. If you select Day:
a. Choose between J ("jour" in French), d ("day" in English) and
t ("tage" in German) with the [R] button. Press the [S] button to
validate the selection.
b. Enter the single days to be counted down with the [R] button.
Press the [S] button to validate.
c. Enter the tens of days to be counted down with the [R]
button. Press the [S] button to validate.
d. Enter the hundreds of days to be counted down with the [R]
button. Press the [S] button to validate.
6. If you chose day countdown (day down):
You enter the time to stop the count down on the last day
22