Dvd-Rom And Dvd-Rw Drive Option - HP ProLiant DL160 Gen8 User Manual

Install the drive.
3.
Determine the status of the drive from the drive LED definitions (on page 13).
4.

DVD-ROM and DVD-RW drive option

This server supports the installation of a SATA DVD-ROM optical drive or a SATA DVD-RW optical drive.
To install the component:
If installed, remove the rack bezel (on page 57).
1.
Power down the server (on page 17).
2.
Remove all power:
3.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Extend the server from the rack (on page 17).
4.
Remove the access panel (on page 19).
5.
Remove the processor air baffle (on page 19).
6.
Remove the PCI riser cage (on page 20).
7.
WARNING:
internal system components to cool before touching them.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
Hardware options installation 45