Monitor Images On A Mobile Terminal - Panasonic WV-SFV481 Operating Manual

Resolution control
Changes the image capture size by pressing the dial key "0".
•
Changes the image capture size between 320x320 (320x240 or 320x180) (default) and 640x640
(640x480 or 640x360).
Home position
The image from the camera can be moved to the home position.
Preset
*2 *3
The camera will move to the designated preset position to display images by pressing the dial key
corresponding to the desired channel. (The dial key numbers are not displayed for Preset No 5 or
greater. Only preset IDs will be displayed for them.) (®page 115)
Note
•
A maximum of 8 designated presets can be operated.
AUX control
Controls the AUX terminal.
These buttons will be displayed only when "AUX output" is selected for "Terminal 3" on the setup menu.
(®page 134)
Note
•
Some cellular phones cannot change the image capture size even when resolution is changed by
resolution control.
•
Depending on the image capture size selected for "JPEG(1)" or "JPEG(2)", "Resolution" may not be
able to be used.
•
When the HTTP port number is changed from "80", enter "http://IP address: (colon) + port number/
mobile" in the address box of the browser. When using the DDNS function, access to "http://Host
*1
name registered in the DDNS server: (colon) + port number/mobile".
•
When "HTTPS" is selected for "HTTPS" - "Connection" on the [Advanced] tab of the "Network" page,
enter as follows.
"https://IP address: (colon) + port number/mobile" or "https://Host name registered in the DDNS server:
(colon) + port number/mobile"
•
When the authentication window is displayed, enter the user name of an administrator or user and
password. Depending on the cellular phone in use, password entry may be required each time the
screen is switched.
•
It is impossible to transmit/receive audio using a cellular phone.
•
Depending on the cellular phone in use, larger size images may not be displayed. In this case, selecting
"9 Low" for "Image quality setting" of "JPEG" (®page 95) may sometimes solve this problem.
•
Depending on the cellular phone in use or its contract plan, it may be impossible to access.
IP address is the global WAN IP address of the router that can be accessed via the Internet.
*1
*2 When "User auth." is set to "On" (®page 154), only users with the access level of "1. Administrator" or "2. Camera control" will be
displayed.
Unavailable when the image type is Panorama, Double Panorama, Fisheye or Quad stream. When the image type is Quad PTZ,
*3
operations are only possible for the top left image.

2.2 Monitor images on a mobile terminal

It is possible to connect to the camera using a mobile terminal via the Internet and monitor images (MJPEG
or JPEG) from the camera on the screen of the mobile terminal. It is also possible to refresh images to display
the latest image.
The compatible mobile terminals are shown as follows. (As of October, 2014)
–
iPad, iPhone, iPod touch (iOS 4.2.1 or later)
–
Android™ mobile terminals
*2 *3
*2
2 Monitor images on a cellular phone/mobile terminal
Operating Instructions 29