Reset The Settings/Reboot The Camera [Default Reset] - Panasonic WV-SFV481 Operating Manual

The status of this camera can be checked on this page.
Viewnetcam.com
[Server]: The URL of the "Viewnetcam.com" service server will be displayed.
[Status]: The registration status for the "Viewnetcam.com" will be displayed.
[Personal(Camera) URL]: The URL of the camera registered for "Viewnetcam.com" will be displayed.
UPnP
[Port number(HTTP), Port number(HTTPS)]: The port number that is set for UPnP port forwarding will be
displayed.
[Status]: The port forwarding status will be displayed.
[Router global address]: The global address of router will be displayed.
Self check
[Hardware1]: The self check result of the hardware will be displayed.
Note
•
Refer to our website (http://security.panasonic.com/pss/security/support/info.html) for further
information about the contents of the displayed statuses (relating to the "Viewnetcam.com" service,
the UPnP function, or the self check).
17.4 Reset the settings/Reboot the camera [Default
reset]
Click the [Default reset] tab of the "Maintenance" page. (®page 56, page 58)
17 Maintenance of the camera [Maintenance]
Operating Instructions 207