Panasonic WV-SFV481 Operating Manual page 145

•
Depending on the network environment, notification may be delayed even when "Real time" is selected
for "Alarm status update mode" on the [Basic] tab of the "Basic" page (®page 62).
•
After configuring the VMD area, the VMD area may move out of alignment when the JPEG/H.264
"Image capture mode" setting is changed. Make sure to check the VMD area after changing the "Image
capture mode" setting.
•
The motion detection function is not the dedicated function to prevent thefts, fires, etc. We are not
responsible for any accidents or damages that may occur.
[VMD image type]
When the "Image capture mode" type is "2 Monitor", select the image that VMD detection will be performed
on.
13 Configure the alarm settings [Alarm]
Operating Instructions 145