Configure The Settings Relating To The Sd Memory Card [Sd Memory Card]; Operating Mode - Panasonic WV-SFV481 Operating Manual

10 Configure the basic settings of the camera [Basic]
10.3 Configure the settings relating to the SD
memory card [SD memory card]
Click the [SD memory card] tab on the "Basic" page. (®page 56, page 58)
The settings relating to the SD memory card can be configured on this page.

Operating mode

[SD memory card]
Select "Use" or "Not use" to determine whether or not to use the SD memory card.
•
Default: Use
IMPORTANT
•
Select "Not use" when operating without an SD memory card.
•
Before removing the SD memory card from the camera, it is necessary to select "Not use" first. When
removing SD memory cards, make sure that the green indicator turns off when the SD ON/OFF button
is pressed and held down (about 2 seconds). The recorded data may become corrupted if the SD
memory card is removed when the SD MOUNT indicator is lit in green.
•
When an SD memory card is replaced after pressing and holding (about 2 seconds) the SD ON/OFF
button, press the SD ON/OFF button and confirm that the SD MOUNT indicator is lit in green. If the
SD ON/OFF button was not pressed, the SD MOUNT indicator will light in green for about 5 minutes
after replacing the SD memory card.
•
When an SD memory card is inserted when "Use" is selected, data will be saved in accordance with
the setting of "Save trigger".
•
After inserting the SD memory card, it is necessary to select "Use" to use the SD memory card.
70 Operating Instructions