Osd Overview; Osd Navigation - Tripp Lite B007-008 Owner's Manual

OSD Overview

On Screen Display (OSD), provides a menu driven interface to handle the PC switching procedure.
While Hot Key switching still works, using OSD is a great deal more convenient - especially in large,
daisy chained installations.
All operations start from the OSD Main Menu. To pop up the Main Menu, tap either of the Ctrl keys
twice:
Note: You can change the hotkey to the Scroll Lock key (see F6 below), in which case you would press [Scroll Lock]
[Scroll Lock].
• OSD always starts in List view, with the highlight bar at the same position it was in the last time it
was closed.
• From the Main Menu, you can go directly to any port by keying in [Ctrl]+[Alt]+[Shift], then the
Port ID Number and pressing [Enter].
Note: With this method, although access switches to the port you just specified, the highlight bar on the OSD
screen doesn't move

OSD Navigation

• [Esc] cancels the current selection, or dismisses the current menu and moves back to the menu one
level above. If you are at the highest menu level, it deactivates OSD.
• Use the Up and Down Arrow Keys to move up or down through the list one line at a time
• Use [Pg Up] and [Pg Dn] to move up or down through the list one screen at a time
• Click on to move up or down through the list one line at a time
• Click on to move up or down through the list one screen at a time
• To activate a port, move the Highlight Bar to it then press [Enter].
• After executing any action, you automatically go back to the menu one level above.
9