Shot Mark Operation Menu - Sony Betacam SX DNW-A28 Operation Manual

Overview of Shot Mark/Shot Data Function

5-1-2 Shot Mark Operation Menu

To display the Shot Mark Operation menu, press the
MENU button while pressing the MARK/UP button.
The menu shown in the figure appears.
Number Name
G01
SEARCH TYPE SELECT
G02 LISTING TYPE SELECT
REC START MARK MODE Select whether to record REC Start marks, for each operating mode.
G03
MARK SELECT IN REC/
G04
ASSEMBLE
To change the settings
The procedures for selecting and changing menu items
are the same as the procedures for the Setup menu.
To change items G02 and G03, press the STOP button
and select the item whose ON/OFF setting you want to
change. Then rotate the jog dial to select ON or OFF
and press the dial.
For more information about using the Setup menu, see
section 6-2-2 "Basic Menu Operations".
5-2
Chapter 5 Shot Mark/Shot Datar
SHOT MARK
GO1:SEARCH TYPE -
GO2:LISTING TYPE
GO3:RS.MARK MODE
GO4:MARK IN REC
The Shot Mark Operation menu is composed of four
items, G01 to G04. The settings for each item are
shown below.
Settings
Select the type of shot marks to index.
rec start mark
shot mark 1
shot mark 2
post mark
all
Select whether to include marks types in the mark list.
rec start mark: Include REC Start marks(ON /OFF)
shot mark 1: Include Shot Mark 1 (ON/OFF)
shot mark 2: Include Shot Mark 2 (ON/OFF)
post mark: Include Post Mark (ON/OFF).
crash REC: Write REC Start marks in crash REC mode ( ON /OFF)
assemble: Write REC Start marks in assemble mode ( ON /OFF)
insert: Write REC Start marks in insert mode (ON/ OFF )
Select the type of marks written during recording and in assemble mode.
shot mark 1
shot mark 2
post mark
all
shot1