Submenu; Displays On The Home Page Of The Submenu - Sony Betacam SX DNW-A28 Operation Manual

2-7 Submenu

Information about the settings and operating status of
the unit is displayed in the FL display panel.

2-7-1 Displays on the Home Page of the Submenu

The home page of the submenu is displayed when you
power the unit on.
Time data
display area
PAGE
PAGE button
1 Channel condition/input video level display
Depending on the unit's operating status, one of the
following is displayed here.
COND: Displayed during playback. The playback
condition is displayed on a scale of three levels.
CONFI: Displayed during crash recording when the
CONFI is set to ON in video settings page 1/2 (see
page 2-22). The playback condition of recorded
signals is displayed on a scale of three levels.
VIDEO: Displayed in E-E mode. When using
composite video, the video level is displayed on a
scale of nine levels.
2-16
Chapter 2 Preparations
1 Channel condition/input video level display
2 Time data display
3 VITC/LTC display
COND TC VITC LTC
01 : 23 : 45 : 01
AU-1 LTC VITC ON
F1 F2 F3
9 VITC ON/OFF display
Operation button F2
8 VITC/LTC/AUTO display
Operation button F1
7 Audio settings page display
4 525/625 display
5 Cassette type and remaining tape
time display
6 Remaining battery power
display
525 SX 50 BATT
SDI
LIST MARK
F4
DOWN
Operation button F4
0 Source video signal display
Operation button F3
a) PREROLL is displayed when the SHIFT button is pressed.
PRE-R: Displayed when PREREAD on video setting
page 1/2 is set to ON. During playback, the
playback condition is displayed on a scale of three
levels. When using composite video in E-E mode,
the video level is displayed on a scale of nine
levels.
2 Time data display
Displays the time data and its type.
TC: Timecode
UB: User bits
No display: CTL
UP
MARK/UP and LIST/DOWN
buttons
a)