Input/Output Signals Of The Connectors - Sony DSR-2000 Service Manual

2-8. Connectors

2-8-2. Input/Output Signals of the Connectors

INPUT
REF.VIDEO :
VIDEO IN :
COMPONENT VIDEO :
S VIDEO :
SDI INPUT :
SDTI (QSDI) :
AUDIO IN :
DIGITAL AUDIO (AES/EBU) : BNC x2 (conformed with AES-3id-1995)
TIME CODE :
i.LINK :
2-6
BNC x2 (loop-through)
NTSC black burst, 0.286 V p-p, 75 Z, sync negative
PAL black burst, 0.3 Vp-p , 75 Z sync negative
BNC x2 (loop-through)
Composite, 1.0 V p-p, 75 Z, sync negative
BNC x3
Y : 1.0 V p-p, 75 Z, sync negative
0.7 V p-p, 75 Z (NTSC : 75 % PAL : 100 %)
R-Y/B-Y :
DIN 4P x1
Y : 1.0 V p-p, 75 Z, sync negative
C : NTSC 0.286 V p-p (burst level), 75 Z
PAL 0.3 V p-p (burst level), 75 Z
BNC x2 (active-through)
Serial digital interface format (270 Mbps),
SMPTE 259M (NTSC)/ITU-R BT.656 (PAL)
BNC x1
Serial data transport interface
(DVCAM compression signal : Video + Audio + TC signal)
SMPTE 305M/322M
XLR 3P x4
Reference level switchable (_6/0/+4 dBu), 600 Z/10 kZ switchable, balanced
BNC x1
SMPTE (NTSC)/EBU (PAL)
0.5 to 18 V p-p, 3 kZ, unbalanced
IEEE1394 connector 6P x1
DSR-2000/2000P