Basic Menu Operations - Sony Betacam SX DNW-A28 Operation Manual

Basic Menu

6-2-2 Basic Menu Operations

This section describes the basic menu displays and
how to change the settings.
For information about how to use item 013, see the section
"Switching between 525/625 line systems (menu item
013)"(page 6-5), and for information about how to use items
B01 to B14, see the section "Menu bank operations (menu
items B01 to B14"(page 6-6).
Displaying the menus
TC
00 : 00 : 00 : 00
AU-1 AUTO
Press the MENU button.
When the SUPER in the submenu is set to other than
OFF, the setting of the currently selected menu item
appears on the monitor connected to the VIDEO
OUTPUT2(SUPER) connector and on the FL display
panel.
Cursor indicating the currently
selected item
Group name for the
currently selected item
HOURS METER
*HO1:OPE HOURS
HO2:DRUM HOURS
6-4
Chapter 6 Setup Menu
525 SX-- BATT
VITCON SDI
MENU button
FL display panel
- 102
- 52
Changing the currently displayed menu
item
TC
00 : 00 : 00 : 00
AU-1
Turn the jog dial.
Turning the dial downward increments the item
number, and turning it upward decrements the item
number.
When the desined menu item is displayed, press the
dial.
Changing a menu item setting value
To change the setting value of the currently displayed
menu item use the following procedure.
TC
00 : 00 : 00 : 00
AU-1 AUTO
1
Turn the jog dial.
The setting value changes at a rate depending on
the jog dial rotation speed.
525 SX-- BATT
AUTO VITCON SDI
Jog dial
525 SX-- BATT
1
VITCON SDI
2