Sorting Shot Marks; Cueing Up A Mark - Sony Betacam SX DNW-A28 Operation Manual

5-2-6 Sorting Shot Marks

Proceed as follows to classify shot marks by cassette
and sort them in timecode order.
1
With the shot mark list displayed, press the STOP
button together with the SET button.
The mark selection screen appears.
2
Rotate the jog dial to select "SORTING LIST" and
press the dial.
NO.
Cassette 1
*012345-DNW-0123-4567-
011
----------------------------
012
Cassette 2-1
013
----------------------------
014
Cassette 3
015
016
----------------------------
Cassette 2-2
017

5-2-7 Cueing up a Mark

Select the mark displayed in the list and press
operation button F4.
To cue up a mark located close to the
current tape position
Press the MARK/UP button together with the F FWD
or REW button. The F FWD or REW button flashes
during the operation.
Note
It is impossible to cue up a virtual shot mark.
Before sorting
SHOT MARK
(---/180)
TIME CODE
S1 10:04:05:11
V 10:07:05:02
R 10:08:35:04
S2 10:09:05:11
R 10:10:35:24
R 10:10:36:00
R 10:05:35:24
3
Rotate the jog dial to change the setting to ON.
Sorting of the list starts.
When sorting finishes, the setting returns to OFF.
To return the list to its original state
Press operation button F1 while pressing the SHIFT
button.
The following example shows the results of sorting,
using a list that contains marks that you have read
twice from the same cassette.
After sorting
SHOT MARK
(---/180)
NO. TIME CODE
*012345-DNW-0123-4567-
011 S1 10:04:05:11
----------------------------
012 S2 10:09:05:11
013 R 10:10:35:24
014 R 10:10:36:00
----------------------------
015 R 10:05:35:24
016 V 10:07:05:02
017 R 10:08:35:04
Chapter 5 Shot Mark/Shot Data
Cassette 1
Cassette 3
Cassette 2
(2-1+2-2)
•Delete marks read twice
•Sort in timecode order
5-7