Vibrate Type; Hearing Aid Device Compatibility - Kyocera Duraxa User Manual

Vibrate Type

You can select vibration patterns for incoming calls, messages, alarms, and scheduled
events.
Select Vibrate Type for Incoming Calls and Messages
1. Press > Settings > Others > Accessibility > Vibrate Type > Incoming
Calls or Messages.
2. Select Contacts, Unsaved Numbers, or Private / Unknown.
If you select Contacts, select All Contacts, or select One Contact, and then

select an entry.
3. Select a vibrate type option by pressing the navigation key up or down, and then
select a vibrate type.
Tip: Vibrate Type can be assigned from the Contacts menu. See
a Contact.
Tip: In standby mode, press and hold
Select Vibrate Type for Voicemail and Alarm/Calendar
1. Press > Settings > Others > Accessibility > Vibrate Type.
2. Select Voicemail or Alarm/Calendar.
3. Select a vibrate type option by pressing the navigation key up or down, and then
select a vibrate type.

Hearing Aid Device Compatibility

Your phone has been tested and rated for hearing aid device compatibility. To use this
function effectively, set the hearing aid option to On.
1. Press > Settings > Others > Accessibility > Hearing Aid.
2. Read the disclaimer and press OK (left softkey).
3. Select On or Off.
On to use a hearing aid device with your phone.

Off to use your phone without a hearing aid device.

Settings
to set your incoming call to Vibrate All.
103
Assign a Vibrate Type to