Table of Contents
Advertisement
7
After 3 to 5 reverse stitches have been sewn,
release
("Reverse/Reinforcement Stitch"
button).
The machine stops sewing.
8
Press
("Start/Stop" button), or press down
on the foot controller.
At this time, if
("Start/Stop" button) is held
down, the machine sews at a slow speed.
The machine starts sewing in the normal
sewing direction.
9
After sewing to the end of the stitching, the
sewing machine stops.
Press
("Start/Stop" button) or release foot
controller.
3
4
1 Beginning of stitching
2 End of stitching
■ Sewing reinforcement stitches
When sewing stitches other than straight or zigzag
stitches that are secured with reverse stitching,
pressing
("Reverse/Reinforcement Stitch"
button) sews reinforcement stitches, 3 to 5 stitches
on top of each other.
1
1 Reverse stitching
2 Reinforcement stitching
Memo
● Whether reverse stitches or reinforcement
stitches are sewn depends on the stitch that
is selected. For details, refer to "Stitch
Settings" (page 94).
1
1
2
5
6
2
2
Cutting the thread
When you have finished sewing, cut the threads.
1
When you wish to finish the stitching and the
sewing machine is stopped, press
("Needle Position" button) once to raise the
needle.
1 "Needle Position" button
• The needle is raised.
2
Raise the presser foot lever.
1 Presser foot lever
3
Pull the fabric to the left side of the machine,
and then pass the threads through the thread
cutter to cut them.
1
1 Thread cutter
1
a
Sewing
45
2
Advertisement
Table of Contents
