Brother 885-U20 Operation Manual page 112

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
APPENDIX
3 Slide the bobbin winder shaft to the left, and
then remove the bobbin from the shaft.
4 Hold the thread end with your left hand, and
wind off the thread clockwise near the bobbin
with your right hand as shown below.
5 Wind the bobbin again.
Note
● Make sure that the thread passes under the
pretension disk of the bobbin-winding
thread guide correctly (page 18).
110