Table of Contents
Advertisement
3.3 Relays regimes
Regime m = 1
Action
Evaluation of correct
internal code from
the buttons
Internal code from
the phone
Regime m = 4
Action
Press buttons
Regime m = 6
Action
Press of the button
Note
Tab. 1 Table of relay controls
3.4 Person in the building
The person in the building means the person who is in telephone contact
with the Brave entry system (i.e. Mr Smith).
3.4.1 Outbound call
An outbound call is a call from the Brave system (i.e. started by a visitor).
Once the system has been dialled, a phone inside of the building rings and on
pick up it is possible to talk to the visitor at the door. By choosing a code it is
possible to switch on a relay (parameter 35) if it is set in mode m=1, switch
over the Day/Night regime (parameter 45, 46) and disconnect the connection
(parameter 43). 10sec before the end of the call (parameter 52) the system
(parameter 3111 and 3121)
Note
According to setting
Day/Night
According to setting
Day/Night
Option to choose 1 or 2
digits of code
2 digit code is basic and
it is possible to shorten it
by using * in the first
place of code during
programming
Note
Any number of button
other than in 311*
Button set in 311*
Note
Any number of button
other than in 311*
Button set in 311* or 312*
t1 – time of connection of relay 1 (parameter 371)
t2 – time between impulses of relay 1 (parameter 301)
BRAVE SlimDP –
Parameter
3211-3215
3311-3315
3411-3415
321*
331*
341*
Parameter
Parameter
User and service manual
Relay
351
361
Relay
3114
3114
Relay
3116
3116
-
21
Advertisement
Table of Contents
