Connect The Keyboard - Brave SlimDP - 01 User And Service Manual

2.5 Connect the Keyboard

Keyboard work as separate code lock, he has connection power supply
12V, input for departure button and one relay with change-over contact. In case
connection by special cable keyboard with Doorphone characteristics those
code lock expand and keyboard can be use not only to control relay in
keyboard, but relay in doorphone Doorphone contol too and use so 10 codes
for one and 10 codes for second relay. Further it is possible keyboard use to
dialling numbers. Exit button can control one or the other relay and relay in
keyboard it is possible control from phone during conversation too
(parameter.30). Code lock for relay in Doorphone from buttons stays
conserved.
Connection by special cable is make that way will you use
programming connectors 8pin. To programming from PC is usings same USB
cable USB-KABslim and program ID-Manager is in new version 2010 equipped
also by program for setting keyboard.
To basic function is necessary have connected to Doorphone
telephone line and to keyboard 12V. 12V for heating board and power supply
of relay in Doorphone can use from same source and it is possible use also for
power supply of locks. Recommended is use low power locks.
The choice is entered by gradual pressing of buttons with digits. Firstly
the key symbol must be pressed to enter a password. When pressing X, the
guard will hang up.
16
BRAVE SlimDP –
User and service manual