Page 1
1 by 3 Mini Display Port Extender Splitter - ID# 889 Operation Manual...
Page 2
Introduction For those who want to display large content the 1x3 Mini Display Port Extender Splitter is for you. Able to extend an image onto 2 or 3 displays, this device also allows you to split an image two or three times to connected displays while giving you a platform that is perfect for multi- tasking.
Page 3
Operation Controls and Functions Front Panel ① MDP OUT 1~3: Connect these slots with the output displays Mini Display Port input port in order to send a signal. Note: It is suggested to use the same type/model of display in order to get optimal image quality.
Page 4
Top Panel ① LINK LED: The green LED will turn on when the input source device is connected. ② POWER LED: The green LED will switch on when the device is powered on. ③ OUT 1~3 LED: The green LED will turn on when the output port is connected with the output display.
Page 5
Timing tables for monitor The 1 by 3 Mini DisplayPort splitter is a smart device with a built in feature that can define which and how many monitors are connected and can transmit the proper signal for the display. Below is the expanded timing list which is supported by the device.
Page 6
1. The timing is listed in the EDID extension block. Some old GPU drivers may not be supported. 2. The total horizontal pixel include the active area and blank area is larger than 4096, some GPU driver may not support the timing. 3.
Page 7
Specifications Output Resolution 1920 x 1200 Input port 1 x Mini DisplayPort Output ports 3 x Mini DisplayPort Power Supply 3.3V / 1.5A DC (US/EU standards, CE/FCC/UL certified) ESD Protection Human body model: ± 8kV (air-gap discharge) ± 4kV (contact discharge) Dimensions(mm) 100 (W) x 70 (D) x 20 (H) Weight(g)
Need help?
Do you have a question about the 889 and is the answer not in the manual?
Questions and answers