Dimm - HP ProLiant DL180 Gen9 Service Manual

Remove the fan.
6.
To replace the component, reverse the removal procedure.

DIMM

WARNING:
internal system components to cool before touching them.
CAUTION:
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
To remove the component:
Power down the server (on page 27).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 28).
o
Remove the server from the rack (on page 30).
o
Remove the access panel
4.
Remove the air baffle (on page 32).
5.
Open the DIMM slot latches.
6.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, take the appropriate anti-static
("Access panel" on page 37).
Removal and replacement procedures 52