Software Installation; Installing Csta Mux - Panasonic KX-NCP Quick Reference Manual

3.1 Installing CSTA MUX

3 Software Installation

3.1 Installing CSTA MUX
1.
Double-click the setup program according to your operating system configuration:
•
32-bit version: Setup(WORLD).exe
•
64-bit version: Setup64(WORLD).exe
Follow the on-screen guidance to install CSTA MUX.
2.
When installation is complete, launch the CSTA MUX program. When you start CSTA MUX for the first
time, the screen below is displayed:
Set your language, MUX listening port, PBX connection IP address and port numbers, enter the information
for each server to be monitored by CSTA MUX, set the call record detail client, and click OK.
Call Detail Record Client
In order for a CTI application to obtain Call Detail Records (SMDR data) from the PBX, it is necessary to
specify the target CTI application's IP address. Only one application can be specified for receiving the
PBX's call record details.
Note
•
When configuring CTI applications for use with CSTA MUX, the CTI application's target IP address
should be set to the IP address of the computer running CSTA MUX, not the IP address of the PBX.
•
Two listening ports can be set; one for Panasonic CTI applications, and one for third-party CTI
applications. Ensure that your CTI applications are set accordingly to communicate with the correct
port.
8 Quick Reference Guide