Maintenance; Installing & Cleaning Dust Filter - Vacmaster VQ1220PF Operator's Manual

MAINTENANCE

7.1. Verify that the power cord is disconnected from the outlet. (fig.1)
7.2. Disconnect the hose from the vacuum, turning large end in counter
clockwise direction. (fig.2)
7.3. Undo the latches and remove the power head from the container. (fig.3)
7.4. Clear all dirt or debris from the container and hose. (fig.4)
7.5. Check the hose, attachments, and power cord to verify that they have not
been damaged.
INSTALLING & CLEANING DUST FILTER
Installing Dust Filter
8.1. Verify that the power cord is disconnected from the outlet.
8.2. Remove power head and place in upside down position.
8.3. Slide dust filter down over the filter cage making sure the whole cage is
covered. (fig.1 & 2)
8.4. Replace the power head on to the container.
Removing and Cleaning Dust Filter
8.5. With the removed power head in the upside down position.
13