Dry Vacuum Operation - Vacmaster VQ1220PF Operator's Manual

3.11 Choose the desired accessories and extension wands and push onto the
suction tube.(fig.12)

DRY VACUUM OPERATION

WARNING! Ensure you read, understand and apply Section 1 'Safety Instructions'.
Reminder: DO NOT vacuum hazardous substances. Use of an incorrect dust bag
will invalidate your warranty
4.1. Verify that the power cord is disconnected from the outlet.(fig.1)
4.2. Remove the top section and fit optional dust filter flange onto the inlet stub, taking
care not to damage the filter. (fig. 2)
4.3. Place the power head back on the container, and secure it in place using the latches.
(fig.3)
4.4. Insert the locking end of the hose into the vacuum port and screw in place. Push the
required attachment onto the free end of the hose or extension.(fig.4)
4.5. Plug in the power cord in to the outlet.(fig.5)
4.6 .Turn the motor on by dipping the switch to the "I" ON position.(fig.6)
4.7. Once you have completed vacuuming. flip the switch to the "o" OFF position and
unplug the power cord from the outlet.
O = OFF
DO NOT USE THE DUST FILTER FOR LIQUID VACUUMING
.
I = ON
10