Docomo Prime Series F-01B Instruction Manual page 118

INFORMATION
During dialup registering stand-by, connecting stand-by of headset profile, handsfree profile or audio profile is
disabled.
When registering FOMA terminal in a PC, distinguish FOMA terminal by the name of device if the PC recognizes
plural devices. When the PC recognizes many devices of the same name, distinguish by the address of device.
Connecting to a registered PC
When connecting a registered PC to FOMA terminal using Bluetooth, set FOMA terminal in connecting
stand-by.
1
On FOMA terminal, m6*4
2
Select "Dial-up(DUN)"
FOMA terminal enters dial-up connecting stand-by state, and returns to the stand-by display.
3
Operate for connecting on a PC.
Checking modem
I When a PC does not detect FOMA terminal correctly, settings and communication cannot be performed.
Confirm the name of modem used on a PC or COM port number set for dialup connection.
<Example> Checking on Windows Vista
1
Click (Start)
(System and maintenance)"
Under Windows XP
a Click "
(Performance and maintenance)"
b On the "
tab "
Under Windows 2000
a Click "
Double-click "
b On the "
tab "
2
Double-click the type of each device Confirm the modem name or COM port
number.
Name of Modem or COM port is shown under "
and LPT))".
C [Connect].
"
(Start)" "
"
(Property of system)" screen, click "
(Device manager)".
(Start)" Click "
(System)" icon.
(Property of system)" screen, click "
(Device manager)".
1.
(Control panel)"
"
(Control panel)"
(System)".
(Control panel)" from "
(Modem)", "
13
"
(Device manager)".
"
(Hardware)"
(Settings)"
(Hardware)"
(COM LPT) (Port (COM