LinMot C1200 Installation Manual page 11

7.3 X3
X3 Motor Sensor
DSUB-9 (f) Note:
Use +5V (X3.3) and AGND (X3.8) only for motor internal hall sensor supply (max. 100mA).
Cable length < 30m.
Caution:
Do NOT connect AGND (X3.8) to ground or earth!
NTI AG / LinMot ®
Preliminary
LinMot Motor:
1 Do not connect
2 Do not connect
3 +5VDC
4 Sensor Sine
5 Temp In
6 Do not connect
7 Do not connect
8 AGND
9 Sensor Cosine
case Shield
www.LinMot.com
C1200 Installation Guide
Page 11/22