Description Of The Connectors / Interfaces - LinMot C1200 Installation Manual

C1200 Installation Guide

7 Description of the connectors / Interfaces

7.1 X1
X1 Motor Phases
PWR+
PGND
Motor Supply: 72VDC nominal, 24...85VDC
Absolute max. Rating: 72VDC +20%.
External Fuse: 16AT / min. 100VDC
If motor supply voltage exceeds 90VDC, the drive will go into error state.
–
–
7.2 X2
X2 Motor Phases
PH1+
PH1-
PH2+
PH2-
PE/SCRN
- Use 60/75°C copper conductors only
- Conductor cross-section: 0.5 – 2.5mm
Page 10/22
Use 60/75°C copper conductors only
Conductor Cross-Section 2.5mm
LinMot Motor:
Motor Phase 1+ red
Motor Phase 1- pink
Motor Phase 2+ blue
Motor Phase 2- grey
Protective Earth / Shield
www.LinMot.com
Preliminary
2 (AWG14) max Length 4m
2
(depends on Motor current) / AWG 21 -14
®
NTI AG / LinMot