Dinette Conversion; Comfort Sofa Sleeper - Winnebago Access User Manual

SECTION 9 –
FURNITURE AND SOFTGOODS
4. Arrange cushions to cover bed area.
NOTE: The cushions to cover the dining table
section are located under the center
dinette seat (lift removable panel below
seat cushion to access) or you may use
the back dinette seat cushion and two
bolster cushions, depending on model.
Reverse steps to reassemble to dinette
configuration.

DINETTE CONVERSION

–If Equipped
(Typical view – your coach may be featured
with two dinette tables and pedestal legs,
depending on model)
Dinette Table Setup
1. Remove the dinette table(s) and pedestal
leg(s) from rear wardrobe or galley cabinet,
depending on model.
9-6
2. Insert dinette pedestal leg(s) into the metal
receiver(s) on the floor in front of sofa.
3. Place dinette table(s) securely onto the dinette
pedestal leg(s).
-Typical View
Reverse steps to store dinette table(s) and
pedestal leg(s).

COMFORT SOFA SLEEPER

–If Equipped
(Typical View - your coach may vary
according to floorplan)
Your coach may be equipped with a Comfort
Sofa Sleeper, which is featured with an air bed
that can be adjusted to the firmness of your
choice.