Battery - HP Stream x360 Maintenance And Service Manual

Battery

Description
Embedded 3 cell, 43 Wh, 3.82 Ah, prismatic battery pack
Before removing the battery, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery.
6. Disconnect the speaker cable from the system board and release the speaker cable from the clips on
the battery. See
Remove the battery:
WARNING!
replacement battery provided by HP, or a compatible battery purchased from HP.
1. Remove the four Phillips PM2.0×7.0 screws (1) that secure the battery to the computer.
NOTE:
removed.
40 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Speakers on page
To reduce potential safety issues, use only the battery provided with the computer, a
The battery is also held in place by a fifth screw that was removed when the bottom cover was
28).
38.
Spare part number
787520-005