Volume Adjustments; Lockout - Elan D1200 Installation Manual And User's Manual

12 channel digital power amplifier elan d1200/d1201
Hide thumbs Also See for D1200:
Table of Contents

Advertisement

D1200/D1201
INSTALLATION MANUAL & USER'S GUIDE
C. VOLUME ADJUSTMENTS
Each amp channel can be individually adjusted from the front panel. Pressing the C
button will cycle thru all the inputs on the amplifier — both Left and Right channels
can be adjusted independently. The C button to the left cycles downward, the one on
the right cycles upward. When the desired channel is displayed on the front panel, use the
V buttons. Again, the V button to the left lowers the volume for that channel, the one
on the right raises the volume. Set the levels by lowering them all the way down, then raise
the volume of any keypads or volume controls to maximum. Slowly adjust volume up for this
channel until the red clipping LEDS start to light up, then drop the level one or two clicks. Follow
this procedure for all channels and the amplifier's volume levels will be properly set up. Factory
default settings put all channel volume levels to 50. Please note: Whenever the Front Display
is illuminated (during volume adjustment, for example), ACE
circuitry is disabled.
+
CHANNEL
D. LOCKOUT
The Lockout feature is designed to disable all front panel functions. Use this feature once the
system is fine tuned and ready-to-go. By locking the system's front panel, prying hands cannot
ruin carefully set level adjustments or overdrive speakers.
To place the D1200 in Lockout Mode:
1. With the Front Display dark, Press C- and V- simultaneously.
2. Continue pressing C- and V-. The Front Display will show the Volume setting momentarily.
3. Four seconds later, the Front Display will read LOCH. Release the buttons.
4. Follow the same procedure to Unlock the D1200. This is a toggle command.
If the user tries to change settings while in Lockout Mode, the Front Display will read LC.
©ELAN Home Systems 2003 All rights reserved 07/03
TURNING THE VOLUME LEVEL PAST THE POINT OF
DISTORTION WILL NOT INCREASE THE VOLUME!
DIGITAL POWER AMPLIFIER
-
SELECT A CHANNEL, THEN ADJUST THE VOLUME
ELAN HOME SYSTEMS
clipping elimination
-
+
VOLUME
PAGE 8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D1201

Table of Contents