Operating Procedures; Basic Operations; Id Registration - Panasonic WX-CC411 Operating Instructions Manual

Operating procedures

Basic operations

TALK: Talking with the customers
This function enables two-way conversations between the
store personnel who are wearing All-In-One Headsets or
Belt Packs and the customer at the order post.
For further details on conversation methods, refer to the
Operating Instructions for the Belt Pack (WX-CT420) or All-
In-One Headset (WX-CH450).
PAGE: Talking with other store personnel
Store personnel who are wearing All-In-One Headsets or
Belt Packs can talk to one another without being heard by
customers.
For further details on paging methods, refer to the Operating
Instructions for the Belt Pack (WX-CT420) or All-In-One
Headset (WX-CH450).
Dual drive-thru lane changeover
(WX-CC412 only)
In the case of a dual drive-thru, it is possible to talk or page
by selecting lane A or lane B.
For details on how to perform lane changeover operation,
refer to the Operating Instructions for the Belt Pack (WX-
CT420) or All-In-One Headset (WX-CH450).

ID Registration

To talk or page using an All-In-One Headset or Belt Pack,
its ID must be registered.
For ID registration, set the Center Module to ID
registration mode, and proceed with the registration by
operating the All-In-One Headset or Belt Pack concerned.
The ID registration procedure is described below based on
an example involving an All-In-One Headset or Belt Pack
operation.
Touch (setting button) on the touch
panel.
The password input screen appears.
Input the password, and touch the [Login]
button.
Default password: 12345
Important
Change the password at regular intervals for security
purposes.
The setting menu is displayed.
31