Usb Interface; Specifications; Interface Signals - Kyocera FS FS-1920 Operation Manual

USB Interface

Specifications

Interface Signals

This printer supports the Full-Speed 2.0 USB. USB (Universal Serial Bus)
interface specifications and interface signals are as follows.
Basic specification
Complies with the Full-Speed USB 2.0.
Connectors
Printer: B-type receptacle (female) with upstream port
Cable: B-type plug (male)
Cable
Use shielded cable that complies with the USB Revision 1.1 standards and
not longer than 5 meters (16 feet).
Transfer Mode
Full speed (max. 12 Mbps)
Power Control
Self-power device
Pin Signal
1 Vbus
2 D-
3 D+
4 GND
Shell —
Table B-3
Power supply (+5 V)
Data transmission
Data transmission
Signal ground
Shield
B-5
USB Interface
Description