Kyocera FS FS-1920 Operation Manual page 88

e-MPS
8
Press the or
at the blinking cursor. Use the > and < keys to move the cursor right
and left.
9
When the desired size is displayed, press the ENTER key.
10
Press the MENU key. The message display returns to Ready.
Maximum Space Assigned to Permanent Code Jobs
This changes the Microdrive space that holds permanent code jobs. You can
change the maximum space from 0 to 9999 (megabytes). The actual
maximum size depends on the size of free Microdrive space, however. The
default size is 50 MB.
1
Press the MENU key.
2
Press the or
e-MPS
3
Press the > key.
4
Press the or
appears.
>e-MPS
Configuration
5
Press the > key.
6
Press the or
appears.
>>Perm. Code JOB
Size
7
Press the ENTER key. A blinking cursor (
>>Perm. Code JOB
Size
8
Press the or
at the blinking cursor. Use the > and < keys to move the cursor right
and left.
key to increase or decrease, respectively, the value
key repeatedly until e-MPS > appears.
>
key repeatedly until >e-MPS Configuration >
>
key repeatedly until >>Perm. Code JOB Size
050MB
050MB
key to increase or decrease, respectively, the value
1-72
) appears.