Kyocera FS FS-1920 Operation Manual page 51

Setting the Duplex Path
To use this function, the duplexer must be installed on the printer.
Option
If the paper type is set to Custom and the option duplexer is installed on
the printer, you can set whether or not to enable duplex printing as follows.
The default setting is Enable.
1
Display the custom paper type (see
on page 1-32) and press the > key.
2
Press the
>>Duplex path
Enable
3
Press the ENTER key. A blinking question mark (?) appears.
>>Duplex path
? Enable
4
Select Enable or Disable using the
default setting for each paper type, see
5
Press the ENTER key.
6
Press the MENU key. The message display returns to Ready.
The custom paper type setting is completed.
or key repeatedly until >>Duplex path appears.
1-35
Paper Handling
Creating Custom Paper Type
or key. For details of the
Paper Type on page 2-12.