Interface; Usb Interface - Kyocera ECOSYS P6021cdn Operation Manual

Interface

This chapter explains the signals used in the printer's USB, and network
interfaces. It also lists pin assignments, signal functions, timings,
connector specifications, and voltage levels.

• USB Interface

• Network Interface

USB Interface

This printer supports the Hi-Speed USB. USB (Universal Serial Bus)
interface specifications and interface signals are as follows.
Specifications
Basic Specification
Complies with the Universal Serial Bus Specification Revision 2.0.
Connectors
Printer: B-type receptacle (female) with upstream port
Cable: B-type plug (male)
Cable
Use a shielded cable that complies with USB 2.0 (Hi-Speed USB) and not
longer than 5 meters (16 feet).
Transfer Mode
High speed (480 Mbps maximum)
Full-Speed (12 Mbps maximum)
Power Control
Self-power device
Interface Signals
USB Connector Pin Assignment
Pin Signal
1 Vbus
2 D-
3 D+
4 GND
Shell —
A-2
Description
Power supply (+5 V)
Data transmission
Data transmission
Signal ground
Shield
Appendix