Interface; Usb Interface - Kyocera FS-C5400DN Operation Manual

A-2

Interface

This chapter explains the signals used in the printer's USB, and network
interfaces. It also lists pin assignments, signal functions, timings,
connector specifications, and voltage levels.

• USB Interface

• Network Interface

USB Interface

This printer supports the Hi-Speed USB. USB (Universal Serial Bus)
interface specifications and interface signals are as follows.
Specifications
Basic Specification
Complies with the Universal Serial Bus Specification Revision 2.0.
Connectors
Printer: B-type receptacle (female) with upstream port
Cable: B-type plug (male)
Cable
Use a shielded cable that complies with USB 2.0 (Hi-Speed USB) and not
longer than 5 meters (16 feet).
Transfer Mode
High speed (480 Mbps maximum)
Full-Speed (12 Mbps maximum)
Power Control
Self-power device
Interface Signals
USB Connector Pin Assignment
Pin Signal
1 Vbus
2 D-
3 D+
4 GND
Shell —
Description
Power supply (+5 V)
Data transmission
Data transmission
Signal ground
Shield